Click here for a picture of the Ultra
Series Station Log panel.

Click here for a picture of the Ultra
Series SSB Options (Where Supported)
panel.

Click here for a picture of the Ultra
Series Pegasus Transceiver shown
Sampling an AM Signal in receive.

Minimum display requirements are 1024x768 running Normal fonts. You must be running a full 32 bit OS such as XP, 2000 or Vista. It requires at least a 1Ghz CPU and 1 GByte of memory along with about 100 megs of available disk space. The Sub-receiver is used by the software and cannot be used while the software background sweep is running. There is full control of the main receiver controls for both receive and transmit on the software panel. The software also features an "AUTOTRACK" function which updates the Main-receiver on a periodic basis transparent to the user while the radio's main receiver front panel tuning is being operated. The user may also schedule updates to the software front panel controls that will track the radio's actual main receiver front panel settings. All HamStationUltra support modules are included such as CW Keyboard, Beacon Monitor, Greyline, Propagation, DX Cluster Monitor, Printing, Logging(both Beacon and Station), Certificate Tracking, Bandplan, WAS, Database, etc. YAESU has done a great job on its remote interface. This radio is performing quite well and is keeping up with the high speed data rates in our software as well as our popular TenTec panels do. Good for YAESU!!

Download a "QuickStart" User Guide of the FT-2000 Advanced Station Manager for the Ultra version 4 series.
FT-2000 Advanced Station Manager QuickStart UserGuide v4.10

A Release Candidate Program is available where perspective users may purchase the pre-release software at a discount from the normal release cost. The purpose of this program is to get pre-release feedback from our perspective users as to how the features work and features they would like to see and reward these hearty souls with a price break. Release candidate users can supply input on software functionality improvements, potential bugs, and future enhancements that will benefit everyone. Unlike the YAESU DMU(c) this is not a patched version from the FTdx9000 series using only a partial display.

The best part is that you will not have to take out a loan at the bank to purchase this software. It is being targeted to sell under $100.00 for the full release version and of course UPDATES ARE FREE. More info to come as the panel completes its initial development. For any questions just ASK MIKE :>)

Born from the same software chassis as our famous Pegasus/Jupiter HamStationUltra and with the extensions provided in the HamStationUltra for the FT-2000, we are now running the HamStationUltra software package on the Kenwood TS-2000(c). Minimum display requirements are 1024x768 running Normal fonts. You must be running a full 32 bit OS such as XP, 2000 or Vista. It requires at least a 1Ghz CPU and 1 GByte of memory along with about 100 megs of available disk space. The Main-receiver is used by the software and cannot be used while the software sweep is running. There is full control of the main receiver controls for both receive and transmit on the software panel. The software also features an "AUTOTRACK" function which updates the Main-receiver tuning on a periodic basis transparent to the user while the radio's main receiver front panel tuning is being operated. The TS-2000 version also features user configurable DSP filters on a mode basis so you can preset a series of popular DSP filter settings for your operating mode. All HamStationUltra support modules are included such as CW Keyboard, Beacon Monitor, Greyline, Propagation, DX Cluster Monitor, Printing, Logging(both Beacon and Station), Certificate Tracking, Bandplan, WAS, Database, etc. Kenwood has done a great job on its remote interface. This radio is performing quite well and is keeping up with the high speed data rates in our software as well as our popular TenTec panels do. Good for Kenwood!!

Download a "QuickStart" User Guide of the TS-2000 HamStationUltra version 4 series.
TS-2000 HanStationUltra QuickStart UserGuide v4.10

A Release Candidate Program is active where perspective users may purchase the pre-release software at a discount from the normal release cost. The purpose of this program is to get pre-release feedback from our perspective users as to how the features work and features they would like to see and reward these hearty souls with a price break. Release candidate users can supply input on software functionality improvements, potential bugs, and future enhancements that will benefit everyone.

Ts-2000 Users NOTE Well! This software is NOT meant to be a clone of the Kenwood ARCP(c) software nor will it become one. If you like the way the Kenwood ARCP(c) software works then stick with it. We are not emulating that software in any way nor do we intend to. Rather we are presenting the TS-2000 in a way that Kenwood did not.

The TS-2000 software is being targeted to sell under $100.00 for the full release version and of course UPDATES ARE FREE. More info to come as the panel completes its initial development. For any questions just ASK MIKE :>)

Please contact our sales department with any questions.

This page is provided as a resource to our " current and future users " with a way to obtain the latest available information about our software. This may include program updates and "free" feature upgrades as they become available.

Whats New and coming?

Last Updated July 18, 2008

Regularly check the download page for the latest news.

Users Please Note: All of our Scope Panels use DSP signal data right from the serial interface. We do not have any connections to the audio output for data display. You are viewing actual signal data. All panels shown were produced on a display resolution 1024x768 using normal resolution (96 dpi) and True Color.